SS 304/304L/304H Sheets and plates are astoundingly used by the paper and squash industries, material stuff producers, condensers in oil-based things and atomic fuel age stations, and petrochemical overseeing stuff makers. The hypothesis behind the nuances of these grade sheets and plates is tended to by the ASTM A240 and ASME SA240 rules.
They are by and large applied in the social event of power exchangers and made technique vessels, goliath haulers, or cutoffs. They have gotten a wipeout from the possible opportunity to use them for the vehicle lines on account of their significant straightforwardness and cost-obliging nature. Grade 304 is essentially alluded to in the fields of food perpetually administering tries as they are unfriendly to disturbing as well as high-temperature connectors. These sheets and plates are being utilized contrastingly in the compositional and constructional industries for their high strain and stress absorbance credits.
SS 304/304L/304H Sheets and Plates furthermore go through assortment testing like PMI tests, IGC tests, arranged assessments, mechanical tests, evening out tests, transmitting tests, enormous increases or more modest than typical tests, fumigation tests, positive material assessments, and so on.
Stainless Steel 304/304L/304H Sheets and Plates Manufacturers in Mumbai, Stainless Steel 304/304L/304H Sheets and Plates Suppliers in Mumbai, Stainless Steel 304/304L/304H Sheets and Plates Stockists in Mumbai, Stainless Steel 304/304L/304H Sheets and Plates Exporters in Mumbai
304/304L/304H Stainless Steel Sheets and Plates Equivalent Grades
| STANDARD | UNS | WNR. | AFNOR | EN | JIS | BS | GOST |
|---|---|---|---|---|---|---|---|
| SS 304 | S30400 | 1.4301 | Z7CN18‐09 | X5CrNi18-10 | SUS 304 | 304S31 | 08Х18Н10 |
| SS 304L | S30403 | 1.4306/1.4307 | Z3CN18‐10 | X2CrNi18-9 / X2CrNi19-11 | SUS 304L | 304S11 | 03Х18Н11 |
| SS 304H | S30409 | 1.4301 | - | - | - | - | - |
Specification of Stainless Steel 304/304L/304H Sheets and Plates
Stainless Steel Sheets and Plates Specification : ASTM A240 / ASME SA240
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness : 0.3 mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.
Chemical Composition of Stainless Steel 304/304L/304H Sheets and Plates
| C | Mn | Si | P | S | Cr | Ni | N | |
|---|---|---|---|---|---|---|---|---|
| 304 | 0.07max | 2.0max | 0.75max | 0.045max | 0.03max | min: 18.0 max: 20.0 | min: 8.0 max: 10.5 | — |
| 304L | 0.03max | 2.0max | 0.75max | 0.045max | 0.03max | min: 18.0 max: 20.0 | min: 8.0 max: 12.0 | 0.10 max |
| 304H | min: 18.0 max:20.0 |
min: 8.0 max: 10.5 |
min: 0.04 max:0.10 |
0.75 max |
2.0 max |
0.045 max |
0.03 max |
0.10 max |
Mechanical Properties Of Stainless Steel 304/304L/304H Sheets and Plates
| Grade | Tensile Strength ksi (min) | Yield Strength 0.2% ksi (min) | Elongation % | Hardness (Brinell) MAX | Hardness (Rockwell B) MAX |
|---|---|---|---|---|---|
| 304 | 75 | 30 | 40 | 201 | 92 |
| 304L | 70 | 25 | 40 | 201 | 92 |
| 304H | 75 | 30 | 40 | 201 | 92 |
Physical Properties of 304/304L/304H Stainless Steel Round Bar
| SS 304/304L | ||||||
|---|---|---|---|---|---|---|
| Density lbm/in3 |
Thermal Conductivity (BTU/h ft. °F) |
Electrical Resistivity (in x 10-6) |
Modulus of Elasticity (psi x 106 |
Coefficient of Thermal Expansion (in/in)/ °F x 10-6 |
Specific Heat (BTU/lb/ °F) |
Melting Range (°F) |
| at 68°F: 0.285 | 9.4 at 212°F | 28.3 at 68°F | 28 | 9.4 at 32 – 212°F | 0.1200 at 68°F to 212°F | 2500 to 2590 |
| 12.4 at 932 °F | 39.4 at 752°F | 10.2 at 32 – 1000°F | ||||
| 49.6 at 1652 °F | 10.4 at 32 – 1500°F | |||||
| SS 304H | ||||||
| Denstiy lbm/in3 |
Coefficient of Thermal Expansion (min/in)-°F |
Thermal Conductivity BTU/hr-ft-°F | Specific Heat BTU/lbm -°F | Modules of Elasticity (annealed)2-psi | ||
| at 68 °F | at 68 – 212°F | at 68 – 1600°F | at 212°F | at 932°F | at 32 – 212°F | in tension (E) |
| 0.285 | 9.2 | 11.0 | 9.4 | 12.4 | 0.12 | 29 x 106 |
OUR EXPORT
| Eastern Europe | Asia | North America | Western Europe | Mid East/Africa |
| Australia | Central/South | UAE | America | Portugal |
| Spain | Indonesia | Italy | Angola | Poland |
| Brazil | Sri Lanka | Russia | China | Singapore |
| Oman | Venezuela | Costa Rica | USA | Qatar |
| Thailand | Canada | Saudi Arabia | Bahrain | Egypt |
| Malaysia | Turkey | Mexico | China | Peru |
| United States | Nigeria | Jordan | Kuwait | Dubai |
| Bangkok | Iran | Germany | UK | New Zealand |
| Vietnam | South Africa | Mexico | Kazakhstan |
DOMESTIC AREA
| Mumbai | Ahmedabad | Bhopal | Bikaner | Pune |
| Delhi | Chennai | Visakhapatnam | Mangalore | Nagpur |
| Bangalore | Kolkata | Siliguri | Assam | Indore |
| Hyderabad | Surat | Nashik | Cochin | Thane |
| Faridabad | Rajkot | Aurangabad | Bhavnagar | Ranchi |
| Coimbatore | Mysore | Salem | Tirupur | Bikaner |
| Raipur | Bhubaneswar | Bhilai | Ankleshwar | Bhiwandi |
| Vadodra | Kochi |
People Also Search